WEKO3
インデックスリンク
アイテム
600Kgf/cm^2級の高強度コンクリートを用いた鉄筋コンクリート柱のせん断破壊性状
https://fukuyama-u.repo.nii.ac.jp/records/7868
https://fukuyama-u.repo.nii.ac.jp/records/7868de44a992-7ccc-482f-b6a5-1c81684a5aa6
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
|
|
|
| Item type | 紀要論文(ELS) / Departmental Bulletin Paper(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 1993-01-01 | |||||
| タイトル | ||||||
| タイトル | 600Kgf/cm^2級の高強度コンクリートを用いた鉄筋コンクリート柱のせん断破壊性状 | |||||
| タイトル | ||||||
| タイトル | Shear failure of R/C columns using high strength concrete of σ_B=600kgf/cm^2 | |||||
| 言語 | en | |||||
| 言語 | ||||||
| 言語 | jpn | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | High Strength Concrete | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Reinforced Concrete Column | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Shear Failure | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Diagonal Tension Cracking Strength | |||||
| キーワード | ||||||
| 言語 | en | |||||
| 主題Scheme | Other | |||||
| 主題 | Ultimate Shear Strengt | |||||
| 資源タイプ | ||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
| 資源タイプ | departmental bulletin paper | |||||
| ページ属性 | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | P(論文) | |||||
| 著者名(日) |
桑田, 裕次
× 桑田, 裕次× 南, 宏一 |
|||||
| 著者名よみ | ||||||
| 識別子Scheme | WEKO | |||||
| 識別子 | 42336 | |||||
| 姓名 | クワダ, ヒロツグ | |||||
| 著者名よみ | ||||||
| 識別子Scheme | WEKO | |||||
| 識別子 | 42337 | |||||
| 姓名 | ミナミ, コウイチ | |||||
| 著者名(英) | ||||||
| 識別子Scheme | WEKO | |||||
| 識別子 | 42338 | |||||
| 姓名 | Kuwada, Hirotsugu | |||||
| 言語 | en | |||||
| 著者名(英) | ||||||
| 識別子Scheme | WEKO | |||||
| 識別子 | 42339 | |||||
| 姓名 | Minami, Koichi | |||||
| 言語 | en | |||||
| 著者所属(日) | ||||||
| 値 | 福山大学工学部建築学科 | |||||
| 著者所属(日) | ||||||
| 値 | 福山大学工学部建築学科 | |||||
| 抄録(英) | ||||||
| 内容記述タイプ | Other | |||||
| 内容記述 | In this study,to investigate shear behavior and strength of reinforced concrete columns using high strength concrete of σ_B=600Kgf/cm^2, eight column specimens were tested, under combined stresses of anti- symmetric bending, shear and constant axial compression. The variables investigated were the quantity and yield stress of transverse reinforcements and the level of axial compression loading. As a result, load-displacement responce, failure modes and strength are. described. Diagonal tension cracking load using elastic theory, and ultimate shear strength obtained from plastic theory were compared against test results. | |||||
| 雑誌書誌ID | ||||||
| 収録物識別子タイプ | NCID | |||||
| 収録物識別子 | AN00217655 | |||||
| 書誌情報 |
福山大学工学部紀要 巻 15, p. 111-122, 発行日 1993 |
|||||